Are you ready to make a stylish and cozy Bandana Cowl knitting pattern Sentro or Addi King machine?
I’ve been working on this fun project using my Sentro 48 and let me tell you, it’s a perfect piece for the colder months! Whether you’re using the Sentro (48 needles) or the Addi King (46 needles), this cowl comes together so quickly and the braid detail with the tassels is just gorgeous.
It’s beginner-friendly, and if you’ve got some knitting experience, you’ll breeze right through it. Plus, it’s such a practical accessory for layering up when the weather cools down. You’ll love how fast it knits up with the machine, talk about instant gratification!
Table of Contents
How much yarn does it take to make a Bandana Cowl?
A bandana cowl typically takes about 100 to 150 grams of yarn, depending on the size, yarn thickness, and stitch pattern you use. If you’re working with worsted weight yarn, you’d need approximately 150 to 200 yards (137 to 183 meters). If the yarn is bulkier, you might need slightly less. Always check your gauge and adjust based on the pattern’s requirements.
Which yarn works best for this Bandana Cowl knitting pattern Sentro?
Worsted weight yarn is ideal for a Bandana Cowl, but you can also use DK yarn if you feel more comfortable using this yarn on your circular knitting machine.
Bandana Cowl Knitting Pattern Sentro Instructions
Bandana Cowl Gauge
14 stitches and 20 rounds = 4 inches in stockinette stitch
NOTE: We used almost a full skein to make this cowl. To avoid running short, please re-use your swatch yarn, double-check your gauge, and be conservative with tails!
Bandana scarf Size
Finished Neck Opening: 17¼ inches circumference, comfortably stretching an additional 5 inches
Finished Height from Point: 13½ inches
Materials You’ll Need to make a Bandana Cowl knitting pattern Sentro:
- Yarn: Approximately 150 to 200 yards of worsted weight yarn (or DK yarn for a lighter cowl)
- Knitting Machine: Sentro (48 needles) or Addi King (46 needles)
- Tapestry needle: To weave in the ends
- Scissors
- Row counter: (optional) to track your rows
- Crochet hook: 4.5 mm
Step 1: Cast On Stitches
We’ll cast on stitches to begin working in the panel mode to make the triangle shape.
- Cast on 5 needles only using waste yarn: Use a different colored yarn (scrap yarn) to cast on and work 4 rounds. This is a temporary start to your project that will be removed later.
- Switch to your main yarn: After the waste yarn setup, attach your main yarn and make 2 rows.
Step 2: Shape the Bandana Point
To create the triangular bandana shape, you’ll need to increase stitches.
- At the end of Row 2, cast on 1 stitch at the beginning of the row. Crank through the row and then cast on 1 stitch at the other end. Continue this process, adding 1 stitch at the start and end of each row, until only 13 needles remain without yarn.
- Make 1 extra row after the last increase and Cast on the last 13 st. weaving them in and out of the needles until you reach the 1st needle with yarn.
- Place the yarn into the yarn guide and work in the tube mode.
Step 3: Knit the Body of the Cowl
- Switch to tube knitting and Knit 30 to 40 rows. Depending on how long you want the bandana cowl. You can adjust this for a shorter or longer cowl as desired.
- After completing the desired number of rows for the neck part, crank the machine without yarn to release st. from the needles and cast them off using waste yarn and a tapestry needle.
- Check the tension: Make sure that your stitches are even and that there are no loose loops.
Pro Tip: For a looser drape, use fewer rows. For a thicker, warmer cowl, opt for more rows.
Step 4: Finish the Cowl
Once you’ve completed the neck rows and are happy with the length and shape, it’s time to finish up!
- Bind of the top st. with a crochet hook making 1SC with 2 knitting loops and 1CH in between to keep the finished piece stretchy.
- Place the bottom st. on a needle and remove the waste yarn from the bottom.
- Create the dropped stitch effect by unravelling the 3 middle stitches. All the way to where you first began working in tube mode, forming a braided look in the center.
- Crochet Edge: Make a SC row around the entire piece using a crochet hook.
- Weave in ends: Use a tapestry needle to weave in any loose ends from your yarn.
- Tassels: Make the tassels to attach to the cowl.
Step 5: Block the Cowl (Optional)
Blocking isn’t necessary, but it helps give the cowl its final shape.
- Soak the cowl in water for about 20 minutes, then gently squeeze out excess water without twisting or wringing.
- Lay it flat to dry, gently stretching it into shape as it dries.
Pro Tip: Blocking is especially useful if you’re using wool or a natural fiber yarn, as it relaxes the stitches and makes the cowl drape beautifully.
Conclusion and Final Thoughts
Knitting a Bandana Cowl on a Sentro or Addi King knitting machine is a rewarding and speedy project, perfect for all skill levels. Whether you’re using worsted or DK yarn, this versatile piece will keep you stylish and warm. Ready to get started? Grab your knitting machine, pick out your favorite yarn, and follow this easy pattern to create a unique, cozy accessory. Happy knitting!
Watch the Video here if you are a Visual Learner
Explore the Pattern Shop
Have questions? Join the Facebook Group!
We hope this article was useful for you! If you have any additional questions, feel free to join my Facebook Group. We created this group for you to share pictures, ask questions, and help each other out.
Here are some other articles you may be interested to read!
Sentro vs Addi Circular Knitting Machines
When it comes to circular knitting machines, the Sentro and Addi brands are among the most popular c…
Easy Balaclava Hooded Cowl Winter Pattern on Sentro or Addi Knitting Machine
The Sentro 48 knitting machine has taken the world of machine knitting by storm, making it…
Fixing Tension Problems in Your Circular Knitting Machine
Have you ever started a project on your circular knitting machine only to find your stitches are too…
Hi! I’m Fabiana, a crochet and knitwear designer with a passion for creating beautiful, functional pieces. I love experimenting with textures, colors, and patterns to craft everything from cozy sweaters to crochet swimsuit. On my YouTube channel, I share tutorials, tips, and behind-the-scenes looks at my design process. Crochet and knitting are more than hobbies—they’re my way of life.
Thanks for getting to know me!
Happy knitting!
